Coldfusion Admiistrator Invalid User Name or Password Please Try Again After Restart

I take difficulties to access the common cold 11 defoliation administrator. I use:

A message maxim the folio cannot load.

I have tried several browsers, turned my software anti-virus and firewall, but notwithstanding nothing.

Can you please shed some light on this problem. I accept an assignment causes niggling time that I really need to.

Cheers in advance.

As you have non mentioned the platform, I guess that its windows.

There could exist several possible causes for this problem...

1. you must check if ColdFusion xi services are running.

GoTo Outset--> Run--> type Services.msc, click OK

Find ten ColdFusion application server in the list of services. Correct click and start.

2. check the port number on which CF11 runs.

Yous can find the Port number in the server.xml file located @ C:\ColdFusion11\cfusion\runtime\conf

-The port number tin can be something after 8500, 8501, etc. 8502.

Apply the appropriate port number to connect to the CF Admin.

http://127.0.0.1:8500/CFIDE/administrator/index.cfm

Delight let us know if that helps.

Tags: ColdFusion

Similar Questions

• ColdFusion service crashes past logging into the coldfusion administrator

  Hello

  After yous change the maximum number of connections to one, you lot can enter is no longer the coldfusion administrator.
  It allows me to enter the password and then continues, just afterward showing merely the left upper frame, the coldfusion service is suspended.

  I use coldfusion mx half dozen.ane on windows 2003 server and IIS.

  Kind regards

  Thomas

  If you mean the "maximum number of simultaneous requests", this setting tin can be changed by mounting to jrun.xml in \CFusionMX\runtime\servers\default\SERVER-INF\.
  The statement is:8 in the ProxyService department.
  Your should evidence 1.
  Don't forget to make a backup copy of the jrun.xml file earlier making any changes.
  You lot need to restart ColdFusion after the change.

• ColdFusion Administration: Adding Data Sources of error

  * Connectedness verification failed for data source: online_store
  [] java.sql.SQLException: Communication during the handshake failed. Y at - information technology a server running on localhost: 3306?
  The root cause was that: coffee.sql.SQLException: Communication during the handshake failed. Y at - information technology a server running on localhost: 3306?

  This is the message I get when I try to add a mysql database using the coldfusion administration page. Never, I get this error when I add an admission database.

  Where could I become incorrect?

  Could someone help or advise something?

  > when it says to enter the jdbc url, I entered in the post-obit:
  > JDBC: / / [localhost]: [3306] / [online_store]
  Leave out the brackets.

  > do nosotros extract the jar file itself which 3 files open and
  > paste in the destination folder?
  NO.

  > do we extract the primary zip to a folder of the aforementioned proper name and
  > Copy and paste the jar file in the destination folder
  Yes. But, earlier that, stop Coldfusion and remove all type JAR files mysql-connector - java-* currently in the directory cf_root/Spider web-INF/lib directory. Otherwise y'all are going to install two drivers.

  > for driver grade: com.mysql.jdbc.five.0.4
  No. I retrieve that should be: com.mysql.jdbc.Driver. Here are more tips on how to configure MySQL5.ten. The same themes were held in this contempo on CFMX and MySQL5 thread.

• Identifier of the ColdFusion administrator

  Hey everybody,

  I use ColdFusion MX7 Developer edition on top of IIS on my local machine. I don't know what happened, but I'm non able to log into the CF on my local automobile administrator. When I go to http://127.0.0.1/CFIDE/administrator/index.cfm, I get the login screen. In my type I CF administrator, and it is immediately the same screen. Has anyone else seen elsewhere?

  I completely uninstalled, reinstalled and updated ColdFusion on my machine, but zippo has changed. I also checked my IIS settings for the CFIDE folder and it looks as I call up he's looking for. I must be missing something.

  I think information technology happened when I installed PHP and MySQL, but I tin't exist sure.
  Whatsoever suggestions?

  Thank you
  Lee.

  I actually thought of her late terminal nighttime. It was my firewall. I recall I ran into this before and I forgot, but so far, the only firewall I've had problems with is Zone Alarm.

  Thanks for answering, he'S.

• 10 ColdFusion administrator - cannot add new user

  I don't have the ability to add more than 1 user, I use the standard:

  

  When I develop the security, I take merely two options.

  

  Can I add together other users?

  Thank you lot

  Are you logged in equally the main administrator account?

• Connexion cord - Coldfusion Administrator

  Is information technology possible to have more than ane parameter configuration connectedness string in CF8?

  CF Admin only allows me to do one or the other just non both.  I need to put two means...

  jdbcCompliantTruncation = imitation

  zeroDateTimeBehavior = convertToNull

  I tried many options.  At last CF8 Admin let me to do this... connectstring = "jdbcCompliantTruncation = fake;" zeroDateTimeBehavior = convertToNull' but it didn't fix the error in my application.

  I choose the fault I like better, just this is inappreciably a solution.  Can someone please?

  ConnectString = "jdbcCompliantTruncation = simulated;" zeroDateTimeBehavior = convertToNull

  Accept you tried to separate the parameters with a '&', as in a URL?

  jdbcCompliantTruncation = imitation & zeroDateTimeBehavior = convertToNull

  I choose the error I like better, but it'south almost a

  solution.

  Ah. Is non so popular eenie meenie miney moe building method of connectedness strings.

• Administrator ColdFusion 10 Javascript errors

  I just installed the 64-bit version of 10 ColdFusion on Windows Server 2008R2 (using IIS 7.5).  I tried to install as close to the Guide of Lockdown CF9 Server as possible, given that CF9 and CF10 have unlike underlying drivers (CF9 is JRun and CF10 is Tomcat, in the CF9 Admin used for file browsing Java applets and CF10 uses jQuery and JavaScript UI components).

  Anyway, things seem to work for most, except that some of the ColdFusion Administrator functionality is broken for me well.  Any identify that requires the use of the new jQuery File Explorer get script errors.  For example, when yous try to specify another JVM path, past clicking on 'Browse Server' results in the error "jQuery is not divers" (encounter http://screencast.com/t/GQMZ1cdLJy ).  Of course, jQuery.js is in the same folder as the offending script (jqueryeasing.js), then it makes no sense.

  Anyone encountered earlier?

  -Carl

  PS: I too posted on the CF-Talk on HouseOfFusion.com mailing list.

  For those playing forth at home, I thought of her.  I needed to remove the query filter URL deny on the/CFIDE/scripts binder.  Everything seems to piece of work at present.

  Thank you lot

  -Carl

• Scheduled task cheque Coldfusion updates gets 403 error

  I am running Coldfusion10 on RedHat Linux6. ColdFusion Administration scheduled task runs that a bank check for Coldfusion updates every 30 days. This month the access_log had the following entry.

  xxx.xxx.xxx.xxx--[xvi/Feb/2016:12:32:15 - 0600] "Go /CFIDE/administrator/updates/task/checkupdates.cfm HTTP/1.1" 403 316 "-" "CFSCHEDULE.

  If I run it manually scheduled task, I meet the bulletin "this scheduled task has been completed successfully" merely still see the error in the log.

  There is nil in the application.log

  When I click on updates to the championship of the update of the server, the hourglass turning for a long time, and it times out with the following mistake.

  Could someone tell me what is the problem?

  Thank you

  

  We rebooted the server, and everything went back to normal.

  Thank you very much for helping u.s.a..

• ColdFusion 11 and Solr

  I simply install ColdFusion 11. I'chiliad certain I chose the option install addons such as Solr, merely when I'm in the coldfusion nether data & Services Administrator, I click on Collections of ColdFusion and I get nada. Information technology won't all become to the folio. If I click on Solr Services, a page will appear. If I click on the collections of ColdFusion and and then restart coldfusion addons I get a folio that appears, saying

  "Failed to call back collections of the Services.Ensure of research that yous installed ColdFusion Search Service and it works."

  I guess that means that it is not installed.

  So I went Adobe - ColdFusion Support Heart: downloads more and downloaded/installed Windows the Standalone install Services module. I do non change the settings or files and installed. I restarted the server. I logged in the coldfusion administrator, and I see the same thing. Nothing has changed. When I get to view the folders I c:coldfuion11 and a c:coldfusionAdd - onServices. If the coldfusionAdd-onServices in the folder coldfusion11 folder?

  I read that yous can create your drove through the administrator or a page of coding. I idea that maybe I should attempt this way. So I created a page to create the collection, and information technology doesn't work anymore.

  What Miss me? I missed a step, or something to go far work?

  I would appreciate any assist I tin.

  I accept a windows 2008 Server.

  We looked at the ports. It does not solve our problem. I asked a senior organisation engineer to piece of work on it for several days without success. Nosotros had installed on a physical car. He tests it on a virtual server and it works beautifully. We have therefore decided to utilize the virtual machine. The engineer decided he probably had to practice with the number of CPUs / cores on the physical machine. I wish you skillful luck.

• CF 11 invalid password for administrator

  
  I try to install CF 11 under windows 2008 R2 SP i server Standard (it is a new server that has non all websites on it yet). The initial installation has no errors and enquire if y'all want to complete the installation by going to the ambassador. I click ok. He goes to https://hostname/CFIDE/administrator/enter.cfm

  "The Spider web page, information technology goes to is called"Configuration and Settings Migration Wizard.

  ColdFusion has been successfully installed. This wizard will
  guide you lot through the remaining steps of server configuration and, where appropriate,
  migrate settings from a previous version of ColdFusion.

  In guild to ensure the security of your server, delight enter your
  ColdFusion administrator password. "

  I type my password and it says it's invalid. I KNOW that it is correct. I uninstalled CF twice now with the same results. However, the page seems a fleck odd. The box is blue and the text is black. Making information technology difficult to read. The test too appears to be pushed down a little (like an image would go there, merely in that location is naught here other than infinite) and in that location is another infinite on the left side also.

  I used IE and Chrome. The same trouble.

  I checked to make certain that JavaScript is enabled and it was...

  I've read that there be a "trusted site". I did it. Did not piece of work.

  I read ".

  Suppose that your site spider web.config file added additional mime types for queue over-consumption and .ttf extensions.

  • < staticContent >
  • < mimeMap fileExtension = "overconsumption" mimeType = "text/plain" / >
  • < mimeMap fileExtension = '.ttf' mimeType = "text/manifestly" / >
  • < / staticContent >

  "

  I don't know where is the web.config file... And so I don't know if it of a trouble or not. Can someone tell me where I can find it. I looked in the folder ColdFusion11 and did not discover.

  I never had this problem before CF installation.

  Tin anyone help?

  Cheers in advance.

  Post edited past: Dawn Green

  For the first option, start IIS and expand your Sites. Correct-click on this particular site, and then select "Explorer". This volition open your webroot for this particular Spider web site. Verify the beingness of the web.config file and rename information technology.

  For the second, take a return of your server.xml file then replace the section higher up (posted by you), by the segment beneath.

  
  connectionTimeout = "20000".
  redirectPort = '8447' / >

  Notation:-changes to the file web.config would have required restart IIS and changes to the server.xml file would crave restarting the ColdFusion application server.

  Kind regards

  Anit Kumar

• Update fails to get https with xi 2 coldfusion

  I made the changes, I establish in the Coldfusion xi - Web Sockets through SSL discussion and I go "the connectedness has been lost" in firefox when I try to go to the coldfusion ambassador.  I got https working in an Apache Tomcat without Coldfusion server successfully.  Is there something that I am missing.  Here is my folio of the server.xml file connector:

  	< connector port = "8443" protocol = "org.apache.coyote.http11.Http11NioProtocol" SSLEnabled = 'true'
  	maxThreads = "150" scheme = "https" secure = "true".
  	AutClient = 'false' sslProtocol = "TLS".
  	keystoreFile = "C:\keystore.jks"
  	keystorePass = "MonMotpasse."
  	keystoreType = "JKS" / >

  Looks like it was a trouble of keystore, even if she never said that I Redid the keystore and all works fine now.

• Using ColdFusion and become "Internal Server Error" instead of the ColdFusion error page

  I'm using IIS7 with Windows Server 2008 R2. I take eleven ColdFusion ready and running. Everything seems to work fine except when I take a coldfusion error, I get an mistake message in IIS instead of ColdFusion. I get the generic 500 - internal fault from the server instead of the ColdFusion page telling me what is the problem.

  It is a new installation on an empty server. Nix else is running on this calculator, and nothing else has been charged.

  In ColdFusion administrator, I have the checkboxes for "Enable robust Exception information" and "enable request Debugging Output" checked.

  If there is no mistake on the page, the page works fine. Its hard to debug when I don't see what is incorrect if there is a typo or something.

  Give thanks you.

  You must uncheck the box for "Enable HTTP Status Codes" under Server settings > settings in CF Admin.

  Kind regards

  Anit Kumar

• Install ColdFusion new 11 - The ODBC ColdFusion Server service is not running or has not been installed.

  I installed the developer on my machine and the bulletin edition, "ColdFusion ODBC Server service is not running or has not been installed." when you attempt to add together an ODBC data source in the ColdFusion administrator. " I've used ColdFusion viii with no problem at all adding ODBC data sources. I uninstalled ColdFusion viii earlier installing ColdFusion 11.

  Yes, the solution is in the testing phase. Nosotros will share the ready soon.

  Kind regards

  Anit Kumar

• ColdFusion service does not outset subsequently update 12

  How-do-you-do

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and at present ten Coldfusion Awarding Server does not offset.

  After installation I ran configuration of the Web server, such as recommended. At present, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Ambassador I become folio with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity issues. Please attempt again later.

  Jakarta/ISAPI/isapi_redirector/ane.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-x-update-12.html page after update running ambassador and download failed several times.

  I restarted the server box, only it did not assist.

  Any ideas?

  Thank you

  CF10 reinstalled, at present works

• I can't access ColdFusion 10 Admin

  A few months ago with no bug, I have installed 10 ColdFusion on a Windows Server 2008 R2. I have tested the server since without plugged into the network and had no problems. Yesterday I plugged into our network and everything worked like a charm, except SMTP. I've been troubleshooting SMTP and finally realized this morning that I needed to put SMTP in ColdFusion. I tried to connect to the ColdFusion ambassador, and he said it was an "Incorrect password". I accept successfully connected to the Admin yesterday several times only not today.

  I ran the passwordreset.bat and choose '1' and so typed in the new password and confirm password then the popup went. I restarted the ColdFusion service and so closed the browser and reopen the browser and typed the password and nonetheless non received the "Incorrect countersign".

  Also, I went into the file ' neo - security.xml "and changed the value"true"to"false"Boolean"admin.security.enabled"to enter the admin without countersign. I was able to connect to the Ambassador without password, but when I fabricated a change and click on 'Submit' information technology does not accept the alter, and it gave me an error:

  «It was an mistake to access this page, check the logs for more details.»

  The log showed the post-obit error:

  "There was an mistake while checking the token. The session has expired or unauthenticated access is suspected. »

  I don't really know what else to exercise at this stage, not to mention the re - install ColdFusion which is my last resort on a production server. If anyone has solutions delight let me know.

  Give thanks you

  Josh

  To the original affiche to a higher place, reports it receives an mistake one time logged into the Admin, where operations give ' room was error access this page, check the logs for more details. ', there is a piece of work effectually for this problem.

  Basically, it is a cookie issue duplicate for the session cookie (s) CF. There are a few solutions to this, and I discuss the problem and workarounds in a blog entry that I simply created:

  "CF911: solve the problem in #ColdFusion Admin get"error accessing this page"on certain actions'.

  http://www.carehart.org/blog/client/index.cfm/2014/4/x/CF_Admin_error_about_error_accessi ng_this_page

  Promise that helps some readers here.

guidryrunis1977.blogspot.com

Source: https://www.eehelp.com/question/11-coldfusion-administrator/

Bagikan Artikel ini